SUPATIMBER® Pressure-Treated Wood is pressure impregnated with
SUPATIMBER® Wood
Preservative and covered by a Lifetime Limited Warranty for its ability
to protect against attack by termites and fungal decay. This unique
formulation of CCA meets or exceeds every federal, state and industry
specification for waterborne preservatives. The chemical is forced
deep into the cells of the wood by a vacuum-pressure process. The
results of this process are clean, leach-resistant productions that
give lasting protection. When you purchase SUPATIMBER® pressure-treated
lumber, timbers and plywood, you can be assured of getting quality
products that meet the highest industry standards for retention and
penetration.
To be sure you are
getting SUPATIMBER® Pressure-Treated Wood look for the SUPATIMBER®
trademark stamp or end tag on each piece. It is your assurance of
quality under a third party independent inspection program.
| BUYING
GUIDE |
| Application |
Retention* |
Typical
Uses |
| Above
Ground Uses |
0.25 |
Decking,
Fencing, Sills, Railings, Joists |
| Soil
or Fresh Water Contact (Non-structural) |
0.40 |
Posts,
Landscape Timbers, Grape Stakes, Retaining Walls |
| Soil
or Fresh Water Contact (Structural) |
0.60 |
Wood
Foundations, Building Poles |
| Piles
Soil or Fresh Water Contact (Structural) |
0.80 |
Foundation
Piles |
| Salt
Water Contact |
2.5 |
Timbers,
Pilings, Bulkheads |
| *
Pounds per cubic foot. Minimum retentions conform to standards
of the American Wood Preservers Association and the American
Wood Preservers Bureau. |
Chemical
Specialties Incorporated
www.treatedwood.com |